Important Notes
Initially both systems, Main and Standby, have been equally configured with regard to managed devices. However, configuration might change over time as parameters of existing devices are changed, new devices are added, or existing devices removed. The following rules must be applied when such changes occur.
Rules:
• If new native devices (e.g. FOX515, FOX61x) are added/removed on/from the Main System, the devices do not need to be added/removed on/from the Standby System too.
• If new devices are added/removed to/from an existing ALS Manager on the Main System, the devices do not need to be added/removed on/from the Standby System too.
• IP routes to equipment networks must be configured both on the Main and the Standby System.
• If a new ALS Manager is added or an existing one's parameters changed on the Main System, the corresponding changes do not need to be applied to the Standby System.
• If a new cross-launch type for ALS-managed equipment is added or an existing one's parameters changed on the Main System, the same changes must also be applied on the Standby system.